Your Design

At regular intervals, SATA produces special limited edition spray guns with fancy surface designs which are only available for a limited period of time. Last year, SATA presented the first special edition of its top spray gun model SATAjet 5000 B: the SATAjet 5000 B Chopper. Further attractively designed special edition spray guns will follow.
It could be your design that adorns the next SATAjet 5000 B special edition
— be part of the SATA Design Contest 2016!
 

In the time from June 15 until August 05, 2016, we will be looking for the best ideas for a new special gun surface design on our top model, the SATAjet 5000 B. Be part of this contest and win one of our attractive prizes!

WHAT IT IS ALL ABOUT

on the SATAjet 5000 B!

HOW IT WORKS

Step 1

Step 2

Step 3

Register to receive your e-mail containing the upload link

Download the template and create your own design following the instructions

Upload your design and secure your chance to win an attractive prize

THE PRIZES

First Prize

Second Prize

Third Prize

  • One SATAjet® 5000 B spray gun featuring the winning design & personalised dedication + breathing protection kit
  • Free entrance ticket, trip & accommodation for Automechanika 2016 in Frankfurt

For the winner

For the second and third place

For the fourth to tenth place

  • One SATAjet® 5000 B spray gun featuring a yet undisclosed design
  • Breathing protection kit
  • SATAjet® 5000 B spray gun featuring a yet undisclosed design

CHOOSING THE WINNERS

 

All completed designs submitted during the competition period running from June 15 until August 05, 2016 will enter the pool. After the entry deadline (August 05, 2016), an international committee consisting of SATA employees and international distribution partners (from the USA, China, France, Italy and Spain) will evaluate all entries and select the TOP 10 designs among them. The winner of the contest will be announced on August 15, 2016. In addition, each participant will be notified by e-mail about the results.

BEFORE YOU GET STARTED, PLEASE OBSERVE THE FOLLOWING:

 

Prize for all participants

Each person participating in the SATA Design Contest 2016 submitting a completed entry will receive a quality SATA gift set as a thank-you.

SATA GmbH & Co. KG | Domertalstraße 20 | 70806 Kornwestheim | Germany
Tel. +49 7154 811-100 | Fax +49 7154 811-196 | E-Mail design@sata.com
 

Your artwork needs to cover both the front and the rear side of the spray gun body.


White cannot be reproduced as a colour; white areas in your design would appear in the original (silver) colour of the spray gun body.


Your artwork must be sent in as a high-res image with min. 300 dpi to allow its reproduction as a special surface. While the initial upload may contain a lower resolution, please ensure that a high-res image will be available upon request.


Data should be created in the CMYK colour mode which can be pre-set in your design software.


Your artwork should overlap the spray gun template by at least 1-2 cm to ensure that it can be transferred onto the actual spray gun body later on; an artwork in the size of 20 x 26 cm (width x height) will be ideal.


By participating in the contest, each participant explicitly consents to cede all design rights to SATA.

 

IMPRINTPRIVACY POLICYTERMS AND CONDITIONSREACHES DEADLINEREACHES DEADLINE
DOWNLOAD TEMPLATEREACHES DEADLINEDOWNLOAD TEMPLATEWHAT IT IS ALL ABOUT >>
SATA GmbH & Co. KG | Domertalstraße 20 | 70806 Kornwestheim | Germany
tel. +49 7154 811-100 | fax +49 7154 811-196 | e-mail design@sata.com
 
BACK TO SATA.COM

© 2002-2016 - Copyright SATA GmbH & Co. KG, Kornwestheim, Germany. All photos, logos and text contained on this web site are the property of SATA GmbH & Co. KG. Except for customer information, any use of text, logos and photos by individuals or companies from these pages without written consent is strictly prohibited. Technical alterations reserved. SATA, SATAjet, the SATA Logo and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products mentioned herein may be the trademarks of their respective owners.

The period of registration has expired on 05 August 2016.

WINNERS 

Winner

Hanslik, Georg (Germany)

Second Place

Manjavinos, Connie (United States)

Third Place

Meister, Daniel (Germany)

Fourth to Tenth Place

4th Benetti, Martin (Italy)

5th Murakami, Ryo (Japan)

6th Demidov, Alexander (United States)

7th Trebeß, Michael (Germany)

8th Münzberg, Robin (Germany)

9th 蒲, 蒲莉 (China)

10th Mühl, Mario (Germany)

WINNERS >>